Posted by DogmongerCA on 12/14/05 11:11am Msg #82450
Installing second tray on HP 1300
Following the HP instrucitions but does not recognize second tray... Any help would be greatly appreciated:-)
|
Reply by Brad_Ca on 12/14/05 11:17am Msg #82452
You will have to set it up.
Go to start. Go to settings. Go to control panel. Go to printers & faxes. Right click on hp1300 printer icon. Go to device settings. Set tray #1 (Manual Feed) to envelope#10, Tray#2 to letter, and tray#3 to legal. Hit apply. Now find a pdf file to print. Hit print. When the print screen comes up, go down to the bax that say pdf paper size. Check it. Hit ok. It should now recogize what size to print.
|
Reply by Brad_Ca on 12/14/05 11:22am Msg #82456
Oops forgot a step. When you right click on the icon go down to properties and click. Then, go to device settings. Also, makw sure it says printer auto select. Hope this helps
|
Reply by DogmongerCA on 12/14/05 11:29am Msg #82464
"What do you select when it goes to Printer auto select drop down menu?
|
Reply by DogmongerCA on 12/14/05 11:22am Msg #82457
1300 only has 2 trays????
|
Reply by Brad_Ca on 12/14/05 11:26am Msg #82459
Does it have a manual feed above the first paper tray? Usually there will be a door covering it
|
Reply by Brad_Ca on 12/14/05 11:40am Msg #82466
Tray #1 should be the 10 page (max) Manual feed tray according to the specs. Just follow the directions, and once you get into device settings, you will see what you have, and you can set it up the way you want it.
|
Reply by PAW_Fl on 12/14/05 11:46am Msg #82474
Set tray #1 for letter and tray #2 for legal. Brad, you're thinking of the 1320 setup, not the 1300.
Also, be sure you set the option that a second tray is installed BEFORE setting tray #2 to legal.
|
Reply by Brad_Ca on 12/14/05 11:50am Msg #82478
Thanks PAW, your right. I just looked at it again.
|
Reply by PAW_Fl on 12/14/05 11:49am Msg #82476
Try these instructions ...
especially the part about setting the "Installed Options" and printing a test page.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00057190
|
Reply by BarbaraL_CA on 12/14/05 12:03pm Msg #82486
click on Control Panel/Printers and Other Hardware/View Installed Printers or Faxes Right Click on your HP1300 and select Properties Click on Device Settings Tab
Here is what I have under "Form to Tray Assignment: Printer Auto Select: Legal Tray 1: Letter Tray 2: Legal Manual Feed(Tray 1): Letter
Under "Installable Options" I have: Tray 2: Installed Allow manual duplexing: Enabled Printer Memory: 16MB
Under the Advanced Tab I have: Always Available Priority 1 Driver: HP LaserJet 1300 PCL6 Spool Print Documents so Program finishes faster Start printing immediately Print spooled documents first Enable advanced printing features
Click on Printing Defaults on the Advanced Tab Click on the Advanced tab... there I have: Paper Output Paper Size: Letter Copy Count: 1 Document Options: Advanced Printing Features: Enabled Print Optimizations: Enabled Printer Features: Send True Type as bitmap: disabled REt: On Layout Options: Orientation: Portrait Page Order: Front to Back
Hope this helps!!!!
|