Posted by John_NorCal on 3/13/05 4:35pm
Msg #25290

Setting default paper tray for HP 1320TN

Hello -- PAW?
Need help from anyone with setting my default paper trays. I have the HP set for tray 1 (top tray) at letter and tray 2 (bottom tray) at legal size. Yet everything I print comes out of the legal. Even when I double check my print preferences before printing, I still get legal paper out and not the letter size. Any ideas?

Reply by PAW_Fl on 3/13/05 4:54pm
Msg #25291

What application are you printing from? Word, Adobe Reader, Word(im)Perfect, notepad????

If using Adobe, be sure to check the select source by PDF paper size.

Download (http://www.pawnotary.com/documents/testfeed.pdf), do not run with the PDF Plug-In. Right click on the link and "save as" to your hard drive. Then print it using your Reader. It should print three pages, 1&3 on legal and page 2 on letter, if everything is set up correctly.

Reply by Dave_CA on 3/13/05 5:16pm
Msg #25298

On the 1320TN tray1= the manual feed & envelop slot.
The 1st "real" tray is #2 and the bottom=#3
Try setting this way and you should be good to go.

Reply by John_NorCal on 3/13/05 8:06pm
Msg #25312

It worked! Thanks Dave (your settings) & PAW's link! n/m