Posted by Calnotary on 11/1/05 5:17pm
Msg #73489

I need to test out my new dual tray, who has that file...

with letter and legal size paper so I can try it now.


thank you.

PD: Its a brother hl-5150dlt

Reply by DellaCa on 11/1/05 5:38pm
Msg #73495

http://www.pawnotary.com/documents/testfeed.pdf

Is this what your asking for from Paws??

Reply by BarbaraL_CA on 11/1/05 5:45pm
Msg #73499

Re: I need to test out my new dual tray, who has that file..

that's the same one I have, I didn't realize PAW had it on his website.

Reply by BarbaraL_CA on 11/1/05 5:41pm
Msg #73497

Re: I need to test out my new dual tray, who has that file..

I can email it to you ... to where?

Reply by Dawn/CA on 11/1/05 7:21pm
Msg #73519

Re: I need to test out my new dual tray, who has that file..

I too just received a new dual-tray printer, hp1320tn. Can anyone tell me how to set it up to know which type of document to print on which size paper? Thanks!

Reply by PAW_Fl on 11/1/05 8:14pm
Msg #73527

Re: I need to test out my new dual tray, who has that file..

Setting up the hardware:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00314861

Setting up the software:
Each computer that has the HP LaserJet 1160/1320 printing-system software installed can use all of the printer features that are available over a network connection through the internal Jetdirect print server that comes standard on the HP LaserJet 1320n and the HP LaserJet 1320tn printers.

To install the HP LaserJet 1320n or HP LaserJet 1320tn printing-system software on networked Windows operating systems, follow these steps:

NOTE: You must have Administrator privileges to install the software on Windows 2000 or Windows XP.

1. Close all of the programs that are open on the computer.
2. Insert the HP LaserJet 1160/1320 printing-system software CD into the CD-ROM drive.
If the CD does not start automatically, click Start, click Run, and then browse to and double-click the HPSETUP.EXE file in the root directory of the CD.
3. Click install HP LaserJet software and follow the on screen prompts.
4. When the Installer software prompts you to select how the printer will be connected, select Connected via the network, and then click Next. Follow the instructions on the screen.
5. When the installation is nearly complete, a setup screen appears that asks whether or not you want to print a test page. Click Yes.
6. If you are prompted to restart the computer, click Yes.

On the Windows task bar, click Start. Access the printers from Settings.
Right-click the HP LaserJet 1320 icon. Click Properties.
Windows 2000/XP: Under Installable Options, change tray 3 to Installed.
Windows 98/Me/NT: Click Configure. Select tray 3 under Optional Paper Sources.

For all installation and configuration information, view the CD that was included with your printer or visit HP online:
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=410622&taskId=115

Reply by Dawn/CA on 11/1/05 8:38pm
Msg #73530

Re: Thanks tons, PAW!!!