Posted by Delta_CA on 6/27/07 8:18pm Msg #197311
Elynx!
How do you get the docs to appear on your screen without it going straight to printing and how do you get it to choose between legal and letter?
|
Reply by ZeeCA on 6/27/07 8:20pm Msg #197312
Re: Elynx! you don't ... it is a blind program which is
annoying...
at least the people I spoke w/ told me that... so print all on legal and get out the paper cutter if your printer does not discern....................
sry
|
Reply by Todd/OH on 6/27/07 8:27pm Msg #197314
I did an Elynx today. No problem n/m
|
Reply by LisaWI on 6/27/07 8:25pm Msg #197313
Re: Elynx! Is that the EDS Viewer?? n/m
|
Reply by PAW on 6/27/07 8:27pm Msg #197315
VMPdelivers DT Viewer will read eLynx (*.elx) files, parse them and present them for viewing and printing. (You can download the viewer from my download directory. See profile for link.)
|
Reply by ZeeCA on 6/27/07 8:32pm Msg #197323
Re: Elynx! aww PAW I knew if anyone knew u would.. thx! n/m
|
Reply by JanetK_CA on 6/27/07 10:00pm Msg #197343
I'm working on same thing w/new pc. I didn't see that download on your list, so I found it on Google. There are 4 choices: no fonts, w/ Mortgagewear Fonts, w/ VMP fonts, and defaults to view. Can you tell me which one to use? Tks!!
|
Reply by Ndwa on 6/28/07 1:52am Msg #197369
I have the true Elynx viewer
I put up on my website long ago. I posted it, but no one seems to care to download it. I have it installed on my computer, but can't find the setup file anywhere. Also, I changed web hosting service earlier this year and went away with using Frontpage as the new hosting service have a better web builder software. I'll try to find it to put back on my site for everyone, hopefully this weekend.
|
Reply by JanetK_CA on 6/28/07 2:32am Msg #197371
Thanks, Andy! n/m
|
Reply by PAW on 6/28/07 4:52am Msg #197374
In the Download directory, there are TWO entries: "dtview_setup" and "dtview_setup_NOFONTS". I think the one with the fonts works better.
|
Reply by DogmongerCA on 6/27/07 8:33pm Msg #197325
Reprint from the Signing Agent board
Not my information, but I cut and pasted with all credit to Walter.:-0 Hi. After you install the ELYNX program, you should hava directory called EYLYNX, In that directory, you should see "CONFIGURE SMARTVUE" Click on that link & at the top of the the window, select TOOLS, Then select CONFIGURATION, THEN SELECT, then select VIEWER TOOLS, Then select VIEW THE DOCUMENT. Now when ever you go to print in EYNLX, you will be able to view the document first.
On another note for PDF documents, you should be able to set the document set to print on paper size rather than all on 1 size. You do need a DUPLEX printer or DUAL TRAY printer for this. Just check your printer settings. It may be under the ADVANCE TAB or call your printer Support.
Walter.
|
Reply by DogmongerCA on 6/27/07 8:34pm Msg #197326
Should have known PAW would pull it off the top of his head
before I could find, cut and paste. I defer to the master:-)
|
Reply by Delta_CA on 6/27/07 8:52pm Msg #197332
Yeah, but it didn't work (at least for me) n/m
|
Reply by PAW on 6/28/07 4:55am Msg #197375
Re: Yeah, but it didn't work (at least for me)
After installing dtview, you MUST configure it to "view". I believe it defaults to "print" on file open. Also, if you have multiple printers, you must configure the print commands for the correct one.
|