Posted by Jon_PA on 3/21/07 11:00am
Msg #181067

Re-inking Ultimark Stamp

The directions I found say add six drops and wait a three hours for the ink to disperse. I have done this four times. The image is better, but the center of the stamp is still faded. I tried standing in on one end...Am I missing something? Thanks.

Reply by Lee/AR on 3/21/07 11:20am
Msg #181073

It's a overnight project. Add a couple more drops to only one side & tilt it so the ink can soak toward the center. Check it. If still not OK, repeat on other side. If that doesn't work either, just smear some ink around on the center of the pad. I have used both methods on an Ideal stamp.

Reply by Jon_PA on 3/21/07 12:08pm
Msg #181096

Thanks n/m

Reply by ewing2surf on 3/21/07 2:50pm
Msg #181151

It sucks when you are so busy that your stamp runs dry dosen't it Jon. Just be thankful your embosser is inkless.