Posted by C. Wayne Moore on 4/20/09 12:27pm
Msg #285681

elynx print utility/Brother 5250DNT printer question?

I am trying to configure the elynx and or my printer to recognize the paper size and print accordingly. Anyone have any experience with either or both?

Reply by RickinVA on 4/20/09 12:32pm
Msg #285683

Setup should be pretty straightforward. As far as Elynx is concered, I usually have to
print them as all legal, if I remember correctly. What are your settings? We could
take it to email. Check my profile for the address.

Rick

Reply by C. Wayne Moore on 4/20/09 12:37pm
Msg #285684

Check your e-mail n/m

Reply by PAW on 4/20/09 5:34pm
Msg #285722

Typically, elynx files print in RAW PCL format, which means the 'formatting' and paper selection has to be coded within the file. RAW PCL does not provide page size criteria to the printer before the page is sent for printing, so the application must provide the option. These files are generated for a generic printer without specific commands because the generating application doesn't know the target printer for printing. Different printers have different commands to handle paper source selection.

Reply by Glenn Strickler on 4/20/09 5:57pm
Msg #285723

elynx has a function to print through windows....

Open the utility, choose tools, then configuration .... You have two ways to do it. 1. Choose view docs, then when they open, choose file, then print using Windows or in the configuration utility, choose to print through Windows.

I have no issues using Brother printers ...

Reply by famena on 4/20/09 6:52pm
Msg #285738

I just emailed you..