Posted by zebbienc on 4/22/10 3:14pm
Msg #332885

slow printing

Recently, I have been experiencing extremely slow printing of docs...It's like each page is being formatted and then printed..Maybe 20 seconds between each page...It's with one lender that I have done quite a bit of business with and they have always printed extremely fast....They don't seem to know the problem....Could it be from my side? Any help will be appreciated...Thanks

Reply by Regal/NC on 4/22/10 3:53pm
Msg #332894

Contact sender. Have them resend docs n/m

Reply by zebbienc on 4/22/10 4:03pm
Msg #332899

Re: Contact sender. Have them resend docs

They have resent and print just as slow...Could it be my problem? Thanks

Reply by HARRY_PA on 4/22/10 4:05pm
Msg #332900

Re: Contact sender. Have them resend docs

Have you tried restarting your computer?

Harry

Reply by jba/fl on 4/22/10 4:10pm
Msg #332902

Re: Contact sender. Have them resend docs

Check your printer settings to be sure you don't have it set "print as image". If that is not the problem, try breaking up the package into 20 pages at a time. That sometimes helps.

Reply by zebbienc on 4/22/10 7:16pm
Msg #332934

Re: Contact sender. Have them resend docs

thanks, I will try this...

Reply by cadmonkey/CA on 4/22/10 9:16pm
Msg #332948

Re: Contact sender. Have them resend docs

that's weird. Sometimes, when I have slow/troublesome pdf's , I check the "print as image" setting and it goes thru and much faster...

Reply by Ernest__CT on 4/22/10 10:15pm
Msg #332960

If you've still got some files hanging around that printed quickly, try printing them. When testing, print the whole package, if that's what you did before. Printing only a few papges probably won't get the same results! If the file prints slowly, there's a problem with either the printer or the PC. If the file prints quickly, then it's the new files.

Not to insult you: After a few test pages from old files have printed you can cancel printing so that you don't print the whole old package. (Sorry, the teacher in me can't resist!)

Reply by Maureen_nh on 4/22/10 11:11pm
Msg #332971

See if they can let you go to the link they are sending from. I had this happen just the other night and it really messed my computer up to the point where I don't think I'll take anymore from that company. First clue was when they tried sendifg me docs and they were kicked back. They split them and they came through but took hours to print. This was not a huge pkg, something wrong on the senders side.

Reply by cadmonkey/CA on 4/23/10 11:39pm
Msg #333192

excellent way to troubleshoot Ernest! n/m