|
| Click for details
 | 20 cc bottle of refill ink for use with Brother stamps. 
 This ink is formulated for use with Brother pre-inked stamps. The ink is oil-based and not washable. To use, remove the handle from your Brother stamp and apply up to 5 drops into each hole. Keep the stamp facing down until the ink begins to flow out. Do not mix colors; blue ink should be used with blue stamps, black ink with black stamps, etc.
 
 IMPORTANT: Because this ink is specifically designed for Brother stamps, attempting to re-ink any stamp other than a Brother will likely ruin it.
 |  | 
|
| Click for details
 | 28 ml bottle of refill ink for use with Trodat premium self-inking seal stamps. 
 This water-based ink is formulated for use with Trodat Premium Self-inking Stamps. To use, remove the ink pad from your Premium Self-inking Stamp and apply up to 20 drops to the inking surface. Please be careful not to overink, and do not mix colors.
 
 IMPORTANT: Because this ink is specifically designed for Trodat Premium Pre-inked stamps, attempting to re-ink any stamp other than a Trodat may ruin your stamp.
 |  | 
|
| Click for details
 | 1/2 ounce bottle of Titan oil-based rubber stamp ink. Available in black, blue, red, green, violet, orange, magenta, pink, yellow, brown, and sea blue. 
 Compatible with Titan and Shiny Eminent flash-based pre-inked rubber stamps. You must match the refill ink to your existing stamp ink color. To refill, remove the handle from your stamp and apply 6 to 8 drops into the inking well. Let sit for 1 hour. Repeat as necessary until the impressions darkens.
 |  | 
|
| Click for details
 | 2 oz. oil-based refill ink for use with MaxLight pre-inked stamps. 
 This oil-based ink is formulated for use with MaxLight pre-inked stamps. To use, remove the stamp handle and place a few drops into the back of the stamp. Let stand overnight. Repeat if necessary.IMPORTANT: Because this ink is specifically designed for MaxLight pre-inked stamps, attempting to re-ink with any other brand may ruin your stamp. This is especially the case with self-inking stamps, which employ water-based ink, rather than oil-based ink.
 |  | 
|
| Click for details
 | 1/2 fluid oz. 
 Stingray refill ink for pre-inked Stingray and Ultimark stamps.
 
 Stingray re-inking fluid can be used to re-ink any Stingray stamp.  The process is easy.  Simply pull the handle off the Stingray stamp and add several drops of re-inking fluid to the ink tower. Let stand for 2-3 hours.
 |  | 
|
| Click for details
 | Water-based stamp ink for use with self-inking stamps and rubber stamp pads. 
 2 fluid ounce bottle. Compatible with Trodat Printy (4912, 4913, and other models), Vision, Ideal, 2000 Plus Printer (30, 40, and other models) and many other brands of self-inking rubber stamps and pads.
 
 Each 2 fluid ounce (60 cc.) bottle contains enough ink for thousands of additional stamp impressions.
 
 When re-inking, ink may be applied directly to a stamp's built-in stamp pad in most cases. If your stamp included re-inking holes, they may also be used. Pleaes follow the directions for your stamp.
 
 THIS INK IS NOT COMPATIBLE WITH ULTIMARK, STINGRAY AND OTHER PRE-INKED STAMPS.
 |  | 
|
| Click for details
 | Xstamper refill ink in a 10 ml bottle. 
 For use in re-inking Xstamper pre-inked stamps.
 |  | 
|  |